Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Fluke 5725A: (90 day) CAL VER ACV IEEE /5790
DATE:                  26-Aug-98
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.9 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       10
NUMBER OF LINES:       114
CONFIGURATION:         Fluke 5790A
=============================================================================
#
# Source:
#   Fluke 5700A Service Manual, Section 3, Rev 2, May 1991
#
# Compatibility:
#   MET/CAL 5.0 or later
#
# Subprocedures:
#   Sub Wait for Operation Complete (OPC) IEEE
#
# Required Files:
#   5790CON1.bmp
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5790A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
# The 90 day specifications of the 5790A are used in TUR computations.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R   Q N                                           F        W
# Set "Wait for OPC" timeout to 30000ms.
  1.002  MATH         M[88] = 30000
  1.003  JMPT         1.016
  1.004  HEAD         PRELIMINARY INSTRUCTIONS
  1.005  DISP         [32]                   WARNING
  1.005  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.005  DISP         of this  verification.  DEATH ON CONTACT may result if
  1.005  DISP         personnel fail to observe safety precautions.
  1.006  OPBR         Is the Fluke 5700A to be calibrated a configured system
  1.006  OPBR         instrument connected to IEEE-488 port 0 on this PC?
  1.007  JMPT         1.012
  1.008  DISP         Connect an IEEE-488 cable from the 5700A to 488 Port 1.
  1.009  DISP         Turn on the 5700A and allow 30 minutes warmup time.
  1.010  DISP         Allow the Fluke 5700A to stablize in an environment
  1.010  DISP         with ambient temperature of 21 to 25 C and relative
  1.010  DISP         humidity of less than 70%.
  1.011  JMP          1.013
  1.012  DISP         Enter the address of the 5700A (MET/CAL default = 15)
  1.012  DISP         when prompted for the UUT address.
  1.013  PIC          5790CON1
  1.014  RSLT         =ACV CALIBRATION
  1.015  RSLT         =
  1.016  IEEE         *CLS;*RST
  1.017  CALL         Sub Wait for Operation Complete (OPC) IEEE
  1.018  JMPL         END  M[89] <= 0
  1.019  IEEE         BTYPE VB5725
  1.020  ACMS                                      300V              M
  1.021  HEAD         ACV CALIBRATION {1100V RANGE (5725A)}: 300V @ 20kHz
  1.022  IEEE         [T30000]OUT 300V,20kHz;OPER
  1.023  CALL         Sub Wait for Operation Complete (OPC) IEEE
  1.024  JMPL         END  M[89] <= 0
  1.025  5790   1100  300.000V       155P%         20kH           I1       2W
  2.001  ACMS                                      600V              M
  2.002  HEAD         ACV CALIBRATION 1100V RANGE (5725A): 600V @ 50kHz
  2.003  IEEE         [T30000]OUT 600V,50kHz;OPER
  2.004  CALL         Sub Wait for Operation Complete (OPC) IEEE
  2.005  JMPL         END  M[89] <= 0
  2.006  5790   1100  600.000V       378P%         50kH           I1       2W
  3.001  HEAD         ACV CALIBRATION 1100V RANGE (5725A): 600V @ 100kHz
  3.002  IEEE         [T30000]OUT 600V,100kHz;OPER
  3.003  CALL         Sub Wait for Operation Complete (OPC) IEEE
  3.004  JMPL         END  M[89] <= 0
  3.005  5790   1100  600.000V       0.1375%       100kH          I1       2W
  4.001  ACMS                                      1000V             M
  4.002  HEAD         ACV CALIBRATION 1100V RANGE (5725A): 1000V @ 40Hz
  4.003  IEEE         [T30000]OUT 1000V,40Hz;OPER
  4.004  CALL         Sub Wait for Operation Complete (OPC) IEEE
  4.005  JMPL         END  M[89] <= 0
  4.006  5790   1100  1000.000V      84P%          40H            I1       2W
  5.001  HEAD         ACV CALIBRATION 1100V RANGE (5725A): 1000V @ 50Hz
  5.002  IEEE         [T30000]OUT 1000V,50Hz;OPER
  5.003  CALL         Sub Wait for Operation Complete (OPC) IEEE
  5.004  JMPL         END  M[89] <= 0
  5.005  5790   1100  1000.000V      84P%          50H            I1       2W
  6.001  HEAD         ACV CALIBRATION 1100V RANGE (5725A): 1000V @ 300Hz
  6.002  IEEE         [T30000]OUT 1000V,300Hz;OPER
  6.003  CALL         Sub Wait for Operation Complete (OPC) IEEE
  6.004  JMPL         END  M[89] <= 0
  6.005  5790   1100  1000.000V      84P%          300H           I1       2W
  7.001  HEAD         ACV CALIBRATION 1100V RANGE (5725A): 1000V @ 1kHz
  7.002  IEEE         [T30000]OUT 1000V,1kHz;OPER
  7.003  CALL         Sub Wait for Operation Complete (OPC) IEEE
  7.004  JMPL         END  M[89] <= 0
  7.005  5790   1100  1000.000V      84P%          1kH            I1       2W
  8.001  HEAD         ACV CALIBRATION 1100V RANGE (5725A): 1000V @ 20kHz
  8.002  IEEE         [T30000]OUT 1000V,20kHz;OPER
  8.003  CALL         Sub Wait for Operation Complete (OPC) IEEE
  8.004  JMPL         END  M[89] <= 0
  8.005  5790   1100  1000.000V      131P%         20kH           I1       2W
  9.001  HEAD         ACV CALIBRATION 1100V RANGE (5725A): 1000V @ 30kHz
  9.002  IEEE         [T30000]OUT 1000V,30kHz;OPER
  9.003  CALL         Sub Wait for Operation Complete (OPC) IEEE
  9.004  JMPL         END  M[89] <= 0
  9.005  5790   1100  1000.000V      371P%         30kH           I1       2W

 10.001  LABEL        END
 10.002  IEEE         [T0]*RST
 10.003  5790         *                                                 S
 10.004  END